NXO Series
NXO Series NXO Series  Box Type Oven  Penang, Malaysia Supplier, Supply, Supplies, Distributor | Zhuo Yue Resources Sdn Bhd
Model NXO-2-T1(T2) NXO-3-T1(T2)
Circulation forced hot-air circulation with 4" exhaust outlet
Power Source AC 220V 3 Ø 60/50 Hz
Consumption Power 6(T1).9(T2) KVA 7.5(T1).10(T2) KVA
Performance Temperature Range T1 : 60 ~ 250°C ; T2 : 60 ~ 350°C
Temperature Stability ± 0.5 °C
Temperature Uniformity ± 1 °C at 100 °C ± 4 °C at 300 °C
± 2 °C at 200 °C ± 5 °C at 350 °C
± 3 °C at 250 °C
Warm - Up Time ambient temp. to 250 °C 35min
ambient temp. to 350 °C 60min
Material Interior Material SUS 304# mirror finish stainless steel
Exterior Material SS 41# steel with baked paint
Heater Ni-Cr alloy
Insulation 48K mineral Wool
Inert Gas Lead-in- Device i) Leakage In-Gas N2, CO2 (normal gaseous)
ii) Gas Preasure input end Max. 10kg/cm2G; output end with pressure adjusting device
iii) Flow Volume max. 25/min. (at max flow volume)
iv) Chamber Gauge 3m/m Hg (at max. flow volume).
v) Duct brass; heat resistance up to 180°C
vi) Pressure Guage floating type
vii) Release Valve action at pressure 0.5kg/cm2
Oxygen Containing Volume Below 22PPM when finish inflation
Safety Devices i) Leakage Circuit Breaker Protection for leakage; short circuit and over current. (sensitivity 30mA)
ii) Fuse rapid sensing with display; for heater and system protection.
iii) Blowing Motor Protection over - current protection (settable type)
iv) over - Temp Prevention H. alarm protection and liquid expansion type auxiliary protection.
v) Trouble display separately display for every trouble
Dimension Inside Dimensions (cm) 60 x 60 x 60 65 x 50 x 90
Outside Dimensions (cm) 92 x 80 x 133(T1)/145(T2) 92 x 70 x 162(T1)/174(T2)
Interior Capacity 216L 270L

FEATURES:

  1. Make high temperature baking environment of low oxygen containing and oxidation-free come true.
  2. Electromagnetic door lock; easy to open/close; good in appearance; no particle befall.
  3. Interior cabinet use stainless steel plate of mirror finish with arc corner; all seams are welded by argon arc; smooth surface, easy mto clean; meet the requirement ofm completely sealed and oxidation-free.
  4. SUS 304# long shaft motor sealed with high temperature resist bearing. (for 350°C models a shaft cooling system is added.)
  5. Professional designed extra long-life P.T.M.R. (Power Thyristor Module Regulator) heater driver. (or linear heater driver A.P.R. can be chosen)

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version